Construction
Construction

Swimming Pool Construction Process – Senator Pools

The creation of your swimming pool and outdoor living space takes place over a series of important phases, carefully co-ordinated to ensure the most smooth transition. Particular care is taken through each of the steps to ensure the creation is of the highest quality. The typical construction phases are as follows:

sydney-pool3

Excavation Process ,Steel Construction and Formwork

The excavation of the ground is the first stage of the construction process. This involves the positioning and setting out of the pool. Our experienced excavators then complete the excavation and in cases of limited access we utilize “mini dig” specialists. After the plumbing is laid, the shell of the pool is formed via the steelwork and formwork. The pool will slowly start to take shape in readiness for the next stage. Careful planning to maximize the internal dimensions of the pool is taken by Senator Pools during this process and the use of professional concretors is essential

sydney-pool6

Plumbing and Pipework and Concrete Pour and Spray

Plumbing and pipework takes place after the excavation and the pipework is placed in strategic places to ensure successful operation of the pool once complete. The plumbing is dependent on the design of the pool and Senator Pools ensure that it all works efficiently to your design. With the steel and shell now laid out, the stage 4 concrete pour and spray is done while strengthening the pool structure. At this stage you will visually start to see the pool taking shape. After this stage is complete, we recommend a 3-4 week “curing period” to allow the concrete to achieve its ultimate strength.

sydney-pool4

Landscaping, Coping and Tiling, Fencing and Interior Fitout, Finishing Touches and Fill Pool With Water

Once the internal shell is cured, the surrounding elements of the pool are completed. Coping and tiling is laid out around the surrounding edges of the pool and any features our customers desire are erected and constructed. The fencing is installed including all other ancillary works as may be required to complete the pool barrier. Upon certification of the pool fence we then complete the rendered pool lining. Almost there!! Finishing touches are applied including an acid wash of the interior shell lining and surrounding areas if required. This process generally takes place 1 day after the lining process has had time to set. Once complete we’ll be ready to fill your pool with water and have you enjoying your new pool! The final stage is filling the pool with water. The length of this process varies depending on the size of the pool. Generally approximately 2 days. (You’ve made it this far so hang in there folks not long to go Sit back, relax and get ready for the joy your new pool will bring.

Satisfied customers

Client Feedback

We engaged Senator Pools for our new pool & spa.  From the first dealing with Mirco & his team we felt confident and comfortable to engage them for the project. When building a pool there are so many obstacles and each time Senator dealt with them and resolved any issue...

Rick Schirripa

New pool & spa

I had the pleasure of meeting Mirco and his team many years ago when they constructed our pool.  They provided a quality service above and beyond what we anticipated with completion in a timely and efficient manner. Recently the pool sustained damage due to a natural disaster and I contacted...

Danielle Watson

General repairs & maintenance

We cannot speak highly enough of the professionalism the team at Senator Pools showed during the construction of our in ground concrete pool. We stepped out of our comfort zone when we decided to upgrade our swim spa for a designed concrete pool but Mirco, Blake and their team...

Loretta Vaccari

Inground pool installation